SIP Trunking
Bring your own SIP provider to Vomyra. Follow the step-by-step guides below to create and register SIP trunks with Plivo, Twilio, or Telnyx, then connect them to your Vomyra AI voice agents for inbound and outbound calling.
Vomyra SIP Server IP: 98.70.52.39 — used for inbound trunks on all providers.
XXXXXXXXXXXXXXXXXXXX.zt.plivo.comyour-name.pstn.twilio.comsip.telnyx.comSetup Guides
Plivo Trunk Setup
Create inbound and outbound SIP trunks on Plivo Zentrunk, whitelist Vomyra's IP, and configure credentials for your voice AI agents.
Twilio Trunk Setup
Configure a Twilio Elastic SIP Trunk with termination, origination, IP ACL, and credential list for Vomyra's SIP server.
Telnyx SIP Setup
Integrate Telnyx SIP trunking with Vomyra using IP address authentication, outbound voice profiles, and credential-based auth.
Register Trunk on Vomyra
Register your configured SIP trunk inside the Vomyra dashboard and link it to your AI voice agent for live call routing.
How it works
SIP trunking lets you use your own carrier while Vomyra handles the AI conversation logic.
- 1Create an inbound trunk on your provider (Plivo or Twilio) and point it at Vomyra's SIP server IP.
- 2Create an outbound trunk and save the termination domain and credentials.
- 3Register both trunks in the Vomyra dashboard and link them to an AI agent.
- 4Your agent is live — inbound calls route through your provider to Vomyra, and outbound calls leave through your trunk.